2000 Natural Lumens
The Sea Dragon 2000F light features a COB LED array that offers a very favorable color temperature and color rendering for todayâ€™s sophisticated digital cameras that by design, require plenty of natural light in order to produce colorful still and video images. The Sea Dragon 2000F closely simulates natural sunlight.
The Sea Dragon 2000 has an impressive CRI of 80 with a color temperature of 5000K making it ideal for underwater imaging use with all cameras, from SeaLifeâ€™s range of underwater cameras, to action camâ€™s up to more sophisticated mirrorless or DSLR cameras.
Wide Beam Angle
The Sea Dragon 2000F (The â€œFâ€ stands for Flood beam) features a 120Â° topside beam angle, 90Â° underwater and features three power levels at 100%, 50% and 25% of the 2000 lumen output. The wide beam angle is ideal to pair with compact action cameras, as it ensures the entire area being recorded is flooded with light. Like all SeaLife Sea Dragon lights, the performance and lumen performance is true and tested.
The Sea Dragon 2000F is easy to expand with SeaLifeâ€™s Flex-Connect system of trays, grips, arms and adapters.Â The 2000 can be connected to any underwater camera system using standard Â¼-20 tripod or GoPro camera mounts.Â Flex-Connect ball joint, YS and cold shoe mounts are available making the 2000 compatible with virtually any underwater camera system.
Powerful 2000 lumen LED light. Latest COB LED array technologyÂ True, lab-tested lumens and not â€œtheoreticalâ€ lumens specified by most other manufacturers.
One button control for easy operation. One button to power light on/off and select brightness
Three brightness levels 100%, 50% and 25%
Hidden emergency signal mode. 1 sec blink interval and SOS Morse code. Push and hold power button for 4 seconds to activate.
60 minute run time at full power
Constant brightness â€“ Regulated circuitry so light wonâ€™t dim with battery power.
80 Color Rendering Index (CRI) that mimics natural daylight.
Easy to expand with Flex-Connectâ„¢ trays, grips, arms, cold-shoe, ball joint and Y-S adapters.
Quick-release button to detach light and aim in crevices and hard to reach areas
120Â° wide beam angle evenly illuminates the subject with no hot spots.
Depth tested to 330ft (100m) â€“ Guaranteed
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment â€“ even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics.
||Anodized aluminum light head with fiber-reinforced polycarbonate body
|Light Source/Bulb Type
||1 x COB LED array (CREE CXA1816 P4 36V)
||2000 lumens (maintains 2000 lumens throughout burn time at full power)
|Brightness Control/Light Modes
||Full power (100%), half power (50%), quarter Power (25%)
|Color Rendering Index
||120Â° on land / 90Â° underwater
||Lithium Ion 7.4V, 3400 mAh, 25Wh (included)
|Battery Charge Time
||60 minutes at full power, 120 min at half power or Auto, 240 min at quarter power
||Tested to 330 feet/100 meters
||8.5â€³ x 9.5â€³ x 2.3â€³ (22cm x 24cm x 6cm), fully assembled with light head, battery, grip and tray
5.1â€³ x 2.2â€³ x 4.1â€³ (13cm x 5.6cm x 10.4cm), head only
||13 ounces (370 grams) light head w/battery installed
||Dual silicone O-rings (lube included)
*CRI is a measure of a light sourceâ€™s ability to show object colors â€œrealisticallyâ€ or â€œnaturallyâ€ compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested â€œin-airâ€ (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.