The Scubapro C370 Regulator is designed with modular components that allow divers to personalize the look of their second stage, including the removable color kit. Changing the color kit is a simple process that can be completed in a few minutes with minimal tools.
This guide explains how to safely perform a Scubapro C370 color kit change step by step, using basic handling techniques to avoid damaging the housing or internal components.
Tools Required
- Standard flathead screwdriver
Step-by-Step: How to Change the Color Kit
1. Prepare the regulator
Ensure the regulator is clean and dry before starting. Place it on a stable, non-abrasive surface to avoid scratches.
2. Remove the existing color kit
Insert a standard flathead screwdriver carefully into the lower edge of the front cover of the Scubapro C370 Regulator. Gently apply leverage to pop the cover upward. The color kit is integrated with this front cover and should detach once released.
3. Detach the color kit
Once the cover is removed, the color insert can be separated from the housing. Handle it gently to avoid bending or damaging the clips.
4. Install the new color kit
Align the replacement color kit with the top of the regulator housing. Insert it from the top and press down evenly until it snaps securely into place.
5. Final check
Ensure the color kit is fully seated and flush with the regulator body. There should be no gaps or loose edges.
Important Notes
- Do not force the screwdriver, as excessive pressure may damage the housing.
- Only use manufacturer-compatible color kits designed for the C370.
- If resistance is felt during removal or installation, recheck alignment before proceeding.
Visual Reference
Refer to the image below for a visual guide on the process.
For a more detailed walkthrough, please see the video below.
Summary
Changing the color kit on the Scubapro C370 regulator is a quick customization option that allows divers to personalize their equipment without affecting performance. With basic care and the correct technique, the process can be completed safely in just a few minutes.
